Join Palo Alto live batch from 19th Aug. (Saturday) 2023. Limited seats are available.
  • Training : +91 84484 40748
  • info@uninets.com
CCNP Service Provider
[yasr_overall_rating size="small"]

CCNP Service Provider Training

The CCNP Service Provider certification is most frequently sought by data center professionals with three to five years of experience. Typical job titles of those who have obtained or are currently seeking the CCNP Data Center certification include Business Services Architect, Technology Architect, Pre-sales Engineer, Design Engineer, Implementation Engineer, and Support Engineer.

The Cisco Certified Network Professional Service Provider (CCNP Service Provider) certification is for service provider network engineers, systems engineers, and network specialists who are responsible for delivering a scalable carrier-grade infrastructure capable of rapid expansion to support ongoing introduction of new managed services and other customer requirements.

 

Course Content

TOP

CCNP Service provide course outline :

Deploying Cisco Service Provider Network Routing (642-883 SPROUTE)
OSPFv2 and OSPFv3 Routing in Service Provider Environments
Describe multi-area OSPFv2 and OSPFv3 operations
Implement multi-area OSPFv2 and OSPFv3 on IOS-XR and IOS-XE
Implement different OSPF areas (stubby, totally stubby, NSSA) on IOS-XR and IOS-XE
Implement OSPF neighbor authentication on IOS-XR and IOS-XE
Troubleshoot OSPF IOS-XR and IOS-XE configuration errors
IS-IS, IPv4, and IPv6 in Service Provider Environments
Describe multi-area IS-IS operations
Implement multi-area IS-IS for IPv4 and IPv6 on IOS-XR and IOS-XE
Implement IS-IS neighbor authentication on IOS-XR and IOS-XE
Troubleshoot IS-IS IOS-XR and IOS-XE configuration errors

 

BGP Routing in Service Provider Environments
Describe the Internet routing hierarchy: Network Service Providers (NSP), Network
Access Point (NAP), ISP Tiers (Tier 1, 2 and 3)
Describe connectivity between an enterprise network and an SP that requires the use of
BGP
Describe connectivity between a SP and upstream SPs
Describe BGP transit AS operations
Implement EBGP and IBGP on IOS-XR and IOS-XE
Implement BGP neighbor authentication on IOS-XR and IOS-XE
Optimize BGP IOS-XR configurations using af-groups, session-groups, and neighborgroups
Optimize BGP IOS-XE configurations using peer-groups
Influence BGP route selection by using various BGP attributes on IOS-XR and IOS-XE
Troubleshoot BGP IOS-XR and IOS-XE configuration errors

 

Route Manipulations in Service Provider Environments
Implement Routing Policy Language (RPL) to configure a desired routing policy on IOSXR
Implement Route-Maps to configure a desired routing policy on IOS-XE
Implement route filterings using prefix-list, distribute-list, and as-path list on IOS-XE
Implement route redistributions on IOS-XR and IOS-XE

 

High Availability Routing Features
Implement NSF/NSR/Graceful Restart for OSPF on IOS-XR and IOS-XE
Implement NSF/NSR/Graceful Restart for IS-IS on IOS-XR and IOS-XE
Implement Bidirectional Forwarding Detection (BFD) for OSPF on IOS-XR and IOS-XE
Implement Bidirectional Forwarding Detection (BFD) for IS-IS on IOS-XR and IOS-XE

Deploying Cisco Service Provider Advanced Routing (642-885 SPADVROUTE)
BGP Routing Features in a Service Provider IP NGN Environment
Describe the BGP routing processes in IOS-XR
Configure the BGP timers on IOS-XR and IOS-XE
Describe the need for BGP confederations in BGP transit backbones
Design and implement BGP route reflectors to scale IBGP in BGP transit backbones on
IOS-XR and IOS-XE
Implement BGP in SP IP NGN IOS-XR and IOS-XE PE routers to support multi-homed BGP
Customers
Implement Remote Triggered Blackhole Filtering (RTBF) on IOS-XR and IOS-XE
Implement BGP TTL security on IOS-XR and IOS-XE
Implement BGP maximum-prefix on IOS-XR and IOS-XE
Implement BGP route dampening on IOS-XR and IOS-XE
Troubleshoot BGP IOS-XR and IOS-XE configuration errors in service provider
environments
Optimize BGP IOS-XE configurations using peer-groups

 

Multicast Routing in a Service Provider IP NGN Environment
Describe Multicast Concepts (multicast distribution trees, multicast routing protocols
and IGMP operations)
Describe Any-source multicast (ASM) versus Source Specific Multicast (SSM)
Describe Intra Domain versus Inter Domain Multicast Routing
Describe the mapping of multicast IP addresses to MAC addresses
Describe and illustrate how RFP check can fail if the unicast and multicast topologies are
non-congruent
Describe multiprotocol BGP functions in mroute distribution
Describe the principles and operations of PIM-SM
Describe multicast source discovery protocol (MSDP) operations
Describe methods used to secure multicast
Implement PIM-SM operations on IOS-XR and IOS-XE
Implement Auto-RP, PIMv2 BSR, Anycast RP on IOS-XR and IOS-XE
Implement Bi-Dir PIM operations in SP IP NGN environment on IOS-XR and IOS-XE
Implement SSM operations on IOS-XR and IOS-XE
Implement MSDP operations on IOS-XR and IOS-XE
Troubleshoot multicast routing IOS-XR and IOS-XE configurations errors in service
provider environments

 

Layer 2 VPNs in Service Provider IP NGN Environments
Describe DNS and DHCP operation in IPv6
Describe the fields that are used in the IPv6 header to support QoS functions
Describe Cisco IOS/IOS-XE and IOS-XR IPv6 network management and troubleshooting
tools like traceroute/ping
Describe dual-stack implementations
Describe IPv6 tunneling mechanisms
Configure IPv6 multicast routing
Configure static IPv6-in-IPv4 tunnels on IOS-XR and IOS-XE
Configure dynamic 6to4 tunnels on IOS-XR and IOS-XE

 

Carrier Ethernet in Service Provider IP NGN Environments
Implement NSF/NSR/Graceful Restart for BGP on IOS-XR and IOS-XE
Implement Bidirectional Forwarding Detection (BFD) for BGP on IOS-XR and IOS-XE
Implement high availability and optimization multicast routing features on IOS-XR and
IOS-XE

Implementing Cisco Service Provider Next-Generation Core Network Services (642-887 SPCORE)
QOS in a Service Provider IP NGN Environment
Describe the DiffServ and IntServ QoS models
Describe the QoS mechanisms (classification and marking, congestion management and
avoidance, traffic policing and shaping)
Describe IPv6 Flow Label
Describe trust boundaries in enterprise and SP environments
Describe Cisco MQC for QoS configurations
Describe hierarchical QoS configurations
Describe the Cisco NBAR feature for discovering network protocols and for packets
classifications
Describe the typical Edge PE routers and Core P routers QoS requirements
Implement classification and marking in an inter-domain network using QPPB on Cisco
IOS-XR and IOS-XE
Implement class-based markings on Cisco IOS-XR and IOS-XE
Implement QoS pre-classify on tunnel interface on Cisco IOS-XR and IOS-XE
Implement CB-WFQ on Cisco IOS-XR and IOS-XE
Implement LLQ on Cisco IOS-XR and IOS-XE
Implement WRED on Cisco IOS-XR and IOS-XE
Implement traffic policing on Cisco IOS-XR and IOS-XE
Implement traffic shaping on Cisco IOS-XR and IOS-XE
Describe LPTS and hardware rate limiters on Cisco IOS-XR routers
Describe MPLS EXP bits
Describe MPLS QoS implementation concepts and models
Implement MPLS DiffServ tunneling on Cisco IOS-XR and IOS-XE
Troubleshoot QoS IOS-XR and IOS-XE configuration

 

MPLS/LDP in a Service Provider IP NGN Environment
Describe the CEF, FIB, LFIB and LIB tables on Cisco routers
Describe MPLS labels and label stack operations on Cisco routers
Describe LDP operations in Cisco routers
Describe MPLS OAM (MPLS LSP ping and MPLS traceroute)
Describe MPLS applications in service provider environment
Implement LDP on Cisco IOS-XR and IOS-XE
Implement LDP high availability features on Cisco IOS-XR and IOS-XE
Troubleshoot LDP on IOS-XR and IOS-XE configuration errors

 

MPLS/LDP in a Service Provider IP NGN Environment
Describe MPLS traffic engineering (TE) concepts
Describe MPLS TE constraint-based path computations
Describe the details of MPLS TE tunnels, including path setup procedures and path
maintenance
Describe methods of assigning traffic into MPLS TE tunnels
Implement MPLS TE tunnels on Cisco IOS-XR and IOS-XE
Implement MPLS TE bandwidth control on Cisco IOS-XR and IOS-XE
Implement MPLS TE link and node protections on Cisco IOS-XR and IOS-XE

 

Transport Technologies
Describe the SP core transition from ATM/SONET/SDH based backbone to
packet based IP/MPLS backbone
Implement 10/40/100 Gigabit Ethernet Interfaces on Cisco IOS-XR routers
Describe DWDM, IPoDWDM and ROADM
Implement IPoDWDM controller/interface on Cisco IOS-XR routers

Implementing Cisco Service Provider Next-Generation Edge Network Services (642-889 SPEDGE)
VPN in Service Provider IP NGN Environments
Describe VPN implementation models (overlay, peer-to-peer)
Describe VPN technologies (L2TPv3, GRE, IPsec VPN, SSLVPN, DMVPN, GETVPN)
Describe L2 vs L3 VPNs

 

MPLS layer 3 VPNs in Service Provider IP NGN Environments
Describe MPLS L3 VPN architecture and operations (RDs, RTs, VRFs, MP-BGP, PE-CE
routing)
Describe the design models for combining Internet access with MPLS L3 VPN services
Describe the various methods used to deploy IPv6 over MPLS (6PE and 6VPE)
Implement MP-BGP between PE routers on IOS-XR and IOS-XE
Implement PE-CE routings (static, EIGRP, OSPF, BGP) on IOS-XR and IOS-XE
Implement complex MPLS layer 3 VPNs on IOS-XR and IOS-XE
Implement carrier supporting carrier (CSC) on IOS-XR and IOS-XE
Troubleshoot MPLS L3 VPNs IOS-XR and IOS-XE configuration errors in service provider
environments

 

Layer 2 VPNs in Service Provider IP NGN Environments
Describe L2TPv3 VPNs over an IP core network
Describe L2 VPNs (AToM and VPLS) over an IP/MPLS core network
Describe AToM Interworking
Implement AToM on IOS-XR and IOS-XE

 

Carrier Ethernet in Service Provider IP NGN Environments
Describe Carrier Ethernet forums and standards (MEF, IEEE, IETF)
2013 Cisco Systems, Inc. This document is Cisco Public. Page 2
Describe the concepts of User PE (U-PE) and Network PE (N-PE)
Describe E-Line versus E-LAN versus E-Tree
Describe QinQ tunneling
Describe Provider Backbone Bridge (PBB – aka MAC-in-MAC)
Describe VPWS versus VPLS
Describe VPLS versus H-VPLS
Describe VPLS signaling using LDP or BGP
Implement QinQ on Cisco ME 3400 Series Switches
Implement VPLS on IOS-XR and IOS-XE

 

Course Fee

TOP

FEE STRUCTURE :

SPROUTE

+91 8383 961 646Training Fee Queries (9 AM - 6 PM IST)

SPADVROUTE

+91 8527 91 67 51Training Fee Queries (9 AM - 10 PM IST)

SPCORE

+91 8383 961 646Training Fee Queries (9 AM - 6 PM IST)

SPEDGE

+91 8527 91 67 51Training Fee Queries (9 AM - 10 PM IST)

 

Trainer Profile

TOP

Trainers' Profile :

Mr. Tushin

Experience: 7+ Years
Certifications: CCIE#48843 SP, CCNP, CCNA, ITIL
Associate Company: Accenture

 

Timing Schedule

TOP

TRAINING PLAN :
Topic Name Regular Weekends Instructor Name
SPROUTE 6 Weeks 6 Weeks Mr. Tushin
SPADVROUTE 6 Weeks 6 Weeks Mr. Tushin
SPCORE 6 Weeks 6 Weeks Mr. Tushin
SPEDGE 6 Weeks 6 Weeks Mr. Tushin
Lab Tour :

Devices Used for CCNP SP Training:

Following along with the current CCIE RSv5, CCIE SPv4 now uses all virtual hardware as well. Specifically the new hardware and software variants are as follows:

  • ASR 9000 running Cisco IOS XR 5.2
  • ASR 1000 running Cisco IOS XE 3.13S.15.4(3)S
  • Cisco 7600 running Cisco IOS 15.5(3)S
  • Cisco ME 3600 running Cisco IOS 15.5(3)S
FREE KIT :

Your Free Kit Include after Course enrolment:

  • Uninets T-Shirt
  • Uninets Notebook , Pen
  • Course related Books and Lab Workbooks
  • Interview preparation and Communication skills training books
  • Free Virtual Rack Access

 

Review

TOP

Students Review :

SauravSauravCheckpoint CCSA Security
I have 8 years of experience in networking but I was looking for enter in security profile. I heard the name of UniNets as one of the best networking training institute, so I enrolled for CCSA checkpoint training here. I have many things to say about UniNets, but in short, you can get 24*7 lab access, working professional trainers, workbook, virtual racks, flexible timings, minimum fees. So, I am highly recommending UniNets for security training.
RohanRohanCheckpoint, ASA, Palo Alto, Load Balancer
I was searching training institute for network security in Delhi NCR, finally I found UniNets for my professional courses training. I have done ASA, Checkpoint, Palo alto, Load balancer training from this institute. The best part about UniNets is that they have industry best trainers and best lab facilities with virtual racks and 24*7 access facilities. I strongly recommending this institute for networking courses.
YatirajYatirajCisco CCNP Security
I have join UniNets for CCNP security. I don't know anything before joining this institute but with the help of trainers and supporting staff I am now able to configure, troubleshoot networking devices. Trainers provided me the basic idea about network security which helps to build my security foundation. They provides 24*7 Lab facility, flexible timings, workbooks, online virtual racks, professional trainers, etc, So UniNets is the best networking institute in India.
Krishna ChandraKrishna ChandraCheckpoint CCSA, Load Balancer
Krishna Chandra has enrolled at UniNets for Checkpoint CCSA course. After completing his training of this certification course he has enrolled again for Load balancer training. He is now able to fly high in IT professionals world.
AmitAmitCheckpoint CCSA
Amit has enrolled at UniNets for Checkpoint CCSA course training. He is very happy after enrollment at UniNets. He is getting 24*7 lab access, industry best CCSA professional trainers, expert lab instructors, online racks, etc. He is now planning to get training in other firewall certification courses like CCSA, Palo alto, etc.
Lalit PandeyLalit PandeyCCIE R&S, Load Balancer, Nexus
"UniNets really made the things easy and I became an expert from a novice. Now I am placed in a top MNC based on Routing and Switching technical expertise which I obtained from wonderful trainers at UniNets. Thank you for everything to team UNINETS"
KawshikKawshikPlacement Oriented Program
I am M.Tech graduate and my interest in networking brought me here. Once I joined freshers programmy networking concepts got cleared and received multiple offers. I am currently pursuing CCIE from here.
AnupamAnupamCCIE R&S, Nexus, Load Balancer
"I was struggling to get a good job before joining UniNets. I enrolled here for CCIE R&S training. My concepts were solidify after few months. Later on I obtained multiple offers from top companies. I really thanks to UniNets for building my career to the highest level. I also enrolled here for other courses such as Nexus and Load Balancer"
Ubaid ShahidUbaid ShahidCCNA, CCNA Security, CCNA Wireless
Being a fresher I was struggling to get a job, After getting enrolled for UniNets placement oriented program I got confidence and finally got placed in NetData Vault. I would definitely recommend UniNets for people like me. I will come back here for advance courses.
Piyush SinghPiyush SinghCCIE R&S, BGP+MPLS, Nexus, Load Balancer
"I have been to many other Institute for clearing my routing and switching concepts but unfortunately they were all so bad until I joined UniNets where I was trained by a CCIE R&S certified trainer himself. He helped me not only clearing my concepts but also helped me in preparing technical round of interviews. Thanks to UniNets for giving me such an expert level training"

Review CCNP Service Provider.

Your email address will not be published. Required fields are marked *

    Enquire Form

    Fill out this simple form for detailed discussion on how can we help you better.

    SCHEDULE DEMO

      Register for Online Live Classes


        ×

        Add any HTML content
        inside the popup box!